The standard range of heavy series pipe - tube clamps are normally used for support piping system in general applications. W.P. range of pipe - tube clamps with more then 1500 PSI ( 100 BAR) and up to 8000 psi (600 BAR) find application in Steel / stainless steel Piping System.

These pipe clamps are supplied as:

• Individual Pipe Clamp with welding plate,
• Individual Pipe Clamp without welding plates
• Multilayer construction
• Rail nuts construction

Features of Heavy Series Pipe Clamp :

• Designed as per DIN-3015 part-2
• Standard Pipe - Tube clamps available in Plastic Polypropylene and Polyimide , Aluminum clamp bodies with Steel / S.S. plates & bolts
• W.P. range above 1500 PSI (100 BAR) for application in Steel / stainless steel piping system

Material and Design of Clamp Body:

• Polypropylene: Colour Green.
• Polyamide: Colour Black
• Thermoplastic Elastomer: Colour Black
• Aluminum: Colour Natural.

Alternative materials and coulours in addition to the above stated standard is available upon request.

Materials and surface finishing of metal parts:

• Carbon Steel Trivalent or Yellow zinc plated (Standard Trivalent plated)
• Carbon Steel Phosphated
• Stainless Steel – SS 304 or SS 303
• Stainless Steel – SS 316

Aluminum series pipe -tube clamps are normally used for high temperature applications (more than 260 degree Celsius) & the W.P. range more then 1500 PSI (100 BAR) and up to 8000 psi (600 BAR) in the Steel / stainless steel Piping System.

Features of Aluminum Series Pipe Clamp :

• Designed according to DIN 3015 - Part -2
• Aluminum Pipe - Tube clamp bodies with Steel / S.S. plates & bolts.
• Constructed through high tensile aluminum extrusion.
• Available along with Multilayer, Welding plates, Rail Nuts, etc.
• Can be availed in different construction types including Rubber Inlay Types & many more

• Straight Union
• Union Elbow
• Reducing Union.
• Union Tee
• Union Cross
• Reducing Tee.
• Bulkhead Union
• Bulkhead Union Elbow.

• Male Stud Connector – BSP, Taper , Metric and NPT,
• Male Stud Elbow – BSP, BSP Taper , Metric.
• Male branch Tee.
• Male Run Tee.

• Female Connector – BSP, Metric.

• Swivel Adjustable Eblow
• Swivel Adjustable Branch Tee
• Swivel Adjustable Run Tee
• Stand Pipe Adaptor
• Swivel union.

• Banjo Elbow
• High Pressure Banjo Elbow.

• Male Female Adaptor
• Hex Nipple
• Dead Plug (closure plug)
• Union Elbow
• Reducing Union.
• Union Tee
• Union Cross
• Reducing Tee.
• Bulkhead Union
• Bulkhead Union Elbow.

Twin Series Pipe - Tube clamps - DIN 3015 Part 3 are designed to clamp two identical Pipe - tube to the Piping Systems. These pipe - tube clamps feature thick plates & heavy bolts to resist High Pressure Piping Application.

Features

• Sizes ranging from 6 MM od up to 50.8 MM OD.
• Capable of resisting W.P. up to 3500 psi ( 300 Bar)
• Available in Plastic - PP / PA with Steel & stainless steel plates & bolts
• Can be availed along with Multilayer, Welding plates, Rail Nuts, etc.
• Available in different construction type including Rubber Inlay Types & many more

Material and Design of Clamp Body:

• Polypropylene: Colour Green.
• Polyamide: Colour Black
• Thermoplastic Elastomer: Colour Black
• Aluminum: Colour Natural.

Alternative materials and coulours in addition to the above stated standard is available upon request.

Materials and surface finishing of metal parts:

• Carbon Steel Trivalent or Yellow zinc plated (Standard Trivalent plated)
• Carbon Steel Phosphated
• Stainless Steel – SS 304 or SS 303
• Stainless Steel – SS 316

Multilayer Pipe clamps - DIN 3015 Part 1, 2 and 3 - Tube clamps are used for securing a tool to a multi-piece panel assembly. They can clamp vertically in 2 layers / 3 layers up to any numbers of layers but recommended up to 3 layers.

Features of Multilayer Pipe Clamp:

• Available in plastic / aluminum bodies with steel or stainless steel plates and bolts
• Resistant to corrosion and rust
• Multilayer Pipe - Tube clamps are specially designed for light duty / heavy duty & twin series only

Material and design of clamp body:

• Polypropylene: colour Green.
• Polyamide: colour Black
• Thermoplastic elastomer: colour Black
• Aluminum: colour natural.

Alternative materials and coulours in addition to the above stated standard is available upon request.

Materials and surface finishing of metal parts:

• Carbon steel trivalent or yellow zinc plated (standard trivalent plated)
• Carbon steel phosphated
• Stainless steel – SS 304 or SS 303
• Stainless steel – SS 316.

• Individual Pipe Clamp with welding plate,
• Individual Pipe Clamp without welding plates
• Multilayer construction
• Rail nuts construction

• Designed as per DIN-3015 part-1
• Standard Pipe - Tube clamps available in Plastic Polypropylene and Polyimide , Aluminum clamp bodies with Steel / S.S. plates & bolts
• W.P. range up to 1500 PSI (100 BAR) for application in Steel / stainless steel piping system

• Polypropylene: Colour Green.
• Polyamide: Colour Black
• Thermoplastic Elastomer: Colour Black
• Aluminum: Colour Natural.

• Carbon Steel Trivalent or Yellow zinc plated (Standard Trivalent plated)
• Carbon Steel Phosphated
• Stainless Steel – SS 304 or SS 303
• Stainless Steel – SS 316

• Designed as per DIN-3015 Part – 1
• Easy to install.
• Easy to Maintain.

• Polypropylene: Colour Green.
• Polyamide: Colour Black
• Thermoplastic Elastomer: Colour Black
• Aluminum: Colour Natural.

• Rail Patti - M S Trivalent or Yellow zinc plated (Standard Trivalent plated)
• Rail Patti – SS 304 or 316 Natural or Bright Finish
• Rail Nut - Carbon Steel Trivalent or Yellow zinc plated (Standard Trivalent plated)
• Rail Nut - Stainless Steel – SS 304 or SS 303
• Rail Nut - Stainless Steel – SS 316

Single Ferrule Hydraulic Fittings are three piece designs comprising of a Socket having a conical seat, a hardened Progressive Ring and a Nut. When the Nut is progressively tightened it makes the Ring “to move on to the tube, which subsequently bites into the pipe, thereby forming a visible collar of material in front of it.

"DL" couplings offered by us are best suited for stainless steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible.

To cater all your requirements of spares of Hydraulic & Pneumatic applications, we manufacture fittings and couplings in various designs and specifications. These are fabricated Steel, Brass and Stainless steel in PUNE under name “DL Hydrofit.

The fittings, couplings and adopters manufactured by us are trouble free and leak proof and are in accordance with standards like DIN: 2353, ISO: 8434 -1, IS: 8805, JIC, SAE, CSN, TGL etc. These are available in different designs like ERMETO, EO, PARKER, IMPERIAL, SWAGELOK and many more.

Threads like ISO 6149 METRIC (MM), METRIC TAPER (MT), BSPP, BSPT, NPT, UN, UNF & SAE straight are used on nut ends and the plug ends.

The widest range of “DL” couplings and fittings are manufactured using extruded and drawn bars and forgings of free cutting Steel & Carbon steel (for steel tubes), Stainless steel 304 / 316 (for SS tubes) & Brass (for copper tubes). All shape items like Elbows, Tees etc; are manufactured from Forgings, which have obvious advantage over plate (a) extreme strength & (b) high impact resistance, whereas Straight items are manufactured from drawn bars.

These fittings are offered in variegated finishes such as Trivalent Blue, Passivated Zinc Plating in regular and Blackening/Phosphated, Zinc Yellow passivated. Threaded ends are protected from dust and getting damage, by covering them with plastic end covers for a long and safe storage.

Tube to Tube fittings.

• Straight Union
• Union Elbow
• Reducing Union.
• Union Tee
• Union Cross
• Reducing Tee.
• Bulkhead Union
• Bulkhead Union Elbow.

Tube to Female Port.

• Male Stud Connector - BSP, Taper , Metric and NPT,
• Male Stud Elbow - BSP, BSP Taper , Metric.
• Male branch Tee.
• Male Run Tee.

Tube to Male Thread.

• Female Connector - BSP, Metric.

Tube to Tube port. (Adjustable Fittings)

• Swivel Adjustable Elbow
• Swivel Adjustable Branch Tee
• Swivel Adjustable Run Tee
• Stand Pipe Adaptor
• Swivel union.

Banjo Fittings.

• Banjo Elbow
• High Pressure Banjo Elbow.

Other Fittings.

• Male Female Adaptor
• Hex Nipple
• Dead Plug (closure plug)
• Union Elbow
• Reducing Union.
• Union Tee
• Union Cross
• Reducing Tee.
• Bulkhead Union
• Bulkhead Union Elbow.